The EPEVER Tracer AN Series Solar Cost Controller is a hugely successful photo voltaic controller suitable for off-grid solar methods. Determined by multiphase synchronous rectification technology, it ensures optimized Power conversion and program balance for a variety of photovoltaic (PV) purposes.
Key Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for excellent photo voltaic Strength harvesting. Essential options include:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Dual-Stage Charging for Improved battery lifetime.
Liquid crystal display Exhibit with true-time knowledge checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections against overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Step Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Make certain all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and person manual.
Verify the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry spot near to the battery financial institution.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Generally follow good safety protocols and make sure the process is driven off before connecting elements.
Step one: Link the battery terminals towards the demand controller (beneficial to constructive, unfavorable to negative).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Move 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power to the controller by connecting the battery first.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Monitoring and Information Read more Logging
The Tracer AN Collection supports actual-time checking utilizing the MT50 remote meter.
Facts could be logged by using the RS485 conversation port utilizing program which include Solar Station Computer system.
Remote monitoring is achievable With all the EPEVER WiFi module.
6. Troubleshooting Prevalent Problems
Difficulty 1: No Ability Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation two: In excess of-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Regulate program parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Greater Performance: Reduced Strength losses during conversion.
Improved Trustworthiness: Stable general performance less than variable loads.
More time Battery Life: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is undoubtedly an exceptional choice for optimizing solar energy technology and extending battery daily life. By next the above setup tutorial, users can make certain utmost efficiency and program longevity.